How to Replace a 3.5 Ecoboost Turbo Oil Feed Line: A Comprehensive Guide (2023)

The oil feed line for a 3.5 Ecoboost turbo should be replaced in order to ensure optimal performance.

3.5 Ecoboost Turbo Oil Feed Line Replacement

The 3.5 Ecoboost Turbo Oil Feed Line Replacement is a simple and quick process that helps maintain your engine and keep it running smoothly. Replacing the oil feed line prevents debris or other particles from entering the engine and causing damage, it also helps to avoid unnecessary stress on the Turbo. This step by step guide outlines what is needed to complete the replacement successfully, ensuring your engine provides maximum performance. With a few tools and some patience, you’ll have the oil feed line replaced in no time!

3.5 Ecoboost Turbo Oil Feed Line Replacement

Replacing the oil feed line in a 3.5 Ecoboost turbo is a relatively straightforward process, but it should only be attempted by an experienced mechanic or technician. There are a few prerequisites and steps that must be taken before starting the replacement process, such as understanding the system components, safety precautions and disconnecting the fuel line system. Additionally, it is possible that the timing chain may need to be replaced as part of this process, so it is important to understand what needs to be done before beginning the job.

Tools and Materials Required for Replacement

Any replacement job requires specific tools and materials to ensure that it is done safely and correctly. For this job, you will need necessary tools such as wrenches and screwdrivers, as well as necessary materials such as new oil feed line tubing and fittings. Make sure you have all of the required tools and materials on hand before beginning the job.

(Video) F-150 Ecoboost 3.5 Turbocharger Replacement (Tips and Tricks)

Prerequisites to Install Oil Feed Line

Before attempting to install a new oil feed line in a 3.5 Ecoboost turbo engine, there are a few prerequisites that must be met first. Firstly, it is important to understand all of the components in the system so that you know how everything fits together and can diagnose any potential issues before they become problems. Secondly, safety precautions should always be taken when working on any engine or vehicle component – make sure you wear eye protection and gloves when working on anything related to your engine or fuel system.

Disconnecting the Fuel Line System

The first step in replacing the oil feed line is disconnecting the fuel lines from their respective components in order to gain access to them for removal or replacement. This includes removing battery cables and mass airflow sensors if necessary, pinching off of fuel lines and removal of fuel injectors and brackets if applicable. Be sure not to damage any other components while disconnecting these parts – take your time when doing this step!

Installing New 3.5 Ecoboost Turbo Oil Feed Line

Once all of the necessary components are disconnected from the engine bay, you can begin installing your new oil feed line tubing & fittings. This involves inserting them into their respective compartments & securing them firmly with mounting clamps or zip ties (or both). Make sure not to overtighten them – this could cause damage! Once everything is securely fastened in place, reconnect any hoses that were removed during disassembly & check for leaks at each connection point before moving on to reinstalling other components.

Replacing Timing Chain, if Required

In some cases where an older engine has been used for many miles without regular maintenance or service intervals, it may be necessary to replace the timing chain as part of this process. Before replacing it however, it is important to inspect it for signs of wear & tear – if any exist then a full replacement should be carried out instead of just patching up parts here & there which could lead to further complications down the road! After replacing it with a new chain (or repairing/servicing existing one), follow manufacturers guidelines when installing back into place – make sure everything lines up correctly & tensioners/guides/gears are adjusted accordingly so that no further issues arise once engine starts running again!


3.5 Ecoboost Turbo Oil Feed Line Replacement

Replacing the oil feed line in a 3.5 Ecoboost turbo engine can be a little bit tricky but with the right tools and knowledge it can be done safely and easily. The most important part of this process is to make sure that all of the parts are compatible with each other and that there are no leaks or malfunctions that could lead to serious engine damage. This guide will explain the steps necessary for successful replacement of the oil feed line in a 3.5 Ecoboost turbo engine.

Removing The Old Oil Feed Line

The first step in replacing the oil feed line is to remove the old one from the engine block. This step requires some basic tools such as a wrench, socket set, and screwdriver, as well as some knowledge of how to access certain parts of the engine block. Once access has been gained, disconnecting any fittings or hoses connected to the existing oil feed line should be done before unbolting it from its secure place on the engine block. It may also be necessary to remove any additional components such as brackets or gaskets located near or around where the oil feed line was originally attached before continuing on with this process.

Preparing New Parts for Installation

Once all of the old components have been removed, it’s time to prepare new parts for installation in their place. This includes cleaning any corrosion off of connectors and ensuring that all new parts are installed properly and securely before being reattached to the engine block. It’s also important to make sure that all seals are replaced if they have become worn or damaged during removal or if they have become brittle due to age. Additionally, it may be necessary to reset ECU parameters if there have been any changes made during installation due to using new parts which require adjustment for proper operation.

Refilling Engine Coolant

Once all new parts have been installed it’s time to refill the engine coolant tank with fresh coolant according to manufacturer specifications. This includes cleaning out any debris from inside of the tank as well as flushing out any old coolant which may still be present after removal of components during installation of new parts. Additionally, some sealant may need to be applied around where new filter caps are attached on top of an engine block depending on vehicle manufacturer directions for best results in leak prevention during operation afterwards.

(Video) 3.5 EcoBoost Turbo Coolant Leak FIX.. How To Replace The Coolant Lines Without Removing The Turbo!!!

Test Drive & Final Checkup

Finally, after refilling coolant and reattaching all components securely, it is important to take a test drive around both incline and decline ramps at slow speeds followed by quick accelerations in order to check for any leaks or malfunctions which may have occurred during installation process or due to incompatibility between certain parts used during replacement process itself. After test drive has been completed it is also important to check hoses, mounts, and connections for leakage or malfunction areas one last time before finally putting vehicle into active use once again after 3.5 Ecoboost turbo oil feed line replacement has been completed successfully!

FAQ & Answers

Q: What is the 3.5 Ecoboost Turbo Oil Feed Line?
A: The 3.5 Ecoboost Turbo Oil Feed Line is a part of the turbocharger system on a vehicle equipped with a 3.5 liter EcoBoost engine. It supplies oil to the turbocharger and is responsible for lubricating the internal components and preventing premature wear or damage to the turbocharger.

Q: Why do I need to replace my 3.5 Ecoboost Turbo Oil Feed Line?
A: Over time, the oil feed line can become clogged, worn, or damaged due to heat, vibration, and debris, causing it to become inefficient or even blocked completely. Replacing the line ensures that your turbocharger has an efficient and reliable supply of oil and prevents any further damage from occurring.

Q: How often should I replace my 3.5 Ecoboost Turbo Oil Feed Line?
A: It is recommended that you replace your 3.5 Ecoboost Turbo Oil Feed Line every 25,000 to 30,000 miles or as needed due to wear and tear or other factors such as dirt and debris buildup in the line.

(Video) F-150 Ecoboost 3.5 Turbo Coolant Connector Replacement (Tips and Tricks)

Q: What are some of the signs that I need to replace my 3.5 Ecoboost Turbo Oil Feed Line?
A: Some signs that you may need to replace your 3.5 Ecoboost Turbo Oil Feed Line include loss of power/performance, poor fuel economy, excessive smoke/vapor out of the exhaust pipe, and unusual noises coming from the engine bay when accelerating or under load.

Q: What tools will I need in order to replace my 3.5 Ecoboost Turbo Oil Feed Line?
A: In order to replace your 3.5 Ecoboost Turbo Oil Feed Line you will need a ratchet set with various sized sockets/wrenches; a screwdriver set; an appropriate drain pan; an appropriate sealant; safety goggles; gloves; proper protective clothing; and of course a replacement oil feed line for your specific engine model/year range/trim level combination.

Replacing the oil feed line of a 3.5 Ecoboost turbo engine is an important part of maintaining the performance and reliability of the engine. The oil feed line should be replaced regularly to ensure that it is functioning correctly and to reduce the risk of failure due to wear and tear. It is important to follow the manufacturers guidelines when replacing the line, as incorrect installation can cause serious damage to the engine. With proper maintenance and regular replacement, your 3.5 Ecoboost turbo engine should provide you with reliable, high-performance operation for many years to come.


1. Turbo Oil Leak
(Gary's Tradition Auto)
2. Why I Remove The Cab To Repair 3.5L Eco Boost Turbo Charger Coolant Leaks (F150 & Expedition)
(Flying Wrenches)
3. Full How To: Replacing Rear 3.5 EcoBoost Turbo Coolant Fittings
(SWRVTech Inc.)
4. 2013 - 2019 Ford Explorer Ecoboost 3.5L Rear twin turbo replacement
(TJ McIntyre)
5. Check This Before Replacing The Turbo #shorts #ford #f150 #ecoboost #fordf150 #turbo #turbocharged
6. The Most Common Oil Leak on Ford’s 3.5L EcoBoost | Vacuum Pump
(Flying Wrenches)
Top Articles
Latest Posts
Article information

Author: Frankie Dare

Last Updated: 03/27/2023

Views: 5371

Rating: 4.2 / 5 (73 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Frankie Dare

Birthday: 2000-01-27

Address: Suite 313 45115 Caridad Freeway, Port Barabaraville, MS 66713

Phone: +3769542039359

Job: Sales Manager

Hobby: Baton twirling, Stand-up comedy, Leather crafting, Rugby, tabletop games, Jigsaw puzzles, Air sports

Introduction: My name is Frankie Dare, I am a funny, beautiful, proud, fair, pleasant, cheerful, enthusiastic person who loves writing and wants to share my knowledge and understanding with you.